Skip to content

[DMG] RetroSix CleanJuice

The CleanJuice for the original Game Boy comes in 2 sizes: Regular and XL. How long your CleanJuice lasts depends on the console you use and the upgrades you have. The chart below gives you estimates for common power sources and how long you can expect your console to run. It’s all about the watts. Let’s use the GBA as an example: standard 2x AA batteries with 1200 mAh have 2.88 watts of power. The best AAs on the market, 2x Eneloop Pro, have 6 watts. The CleanJuice has 6.29 watts. More power = longer life.

4x AAs at 1200 mAh have 5.76 watts. 4x Eneloop Pros at 2500 mAh have 12 watts. The CleanJuice Regular has 9.25 watts, the XL has 11.1 watts.

Device AAs Eneloop Pro CleanJuice CleanJuice XL
Stock GB (0.32 W) 15.3 hours 31.8 hours 24.6 hours 29.5 hours
GB + IPS + CleanAmp (0.7 W) 6.9 hours 14.5 hours 11.2 hours 13.5 hours
GB + IPS + CleanAmp + EZFlash (1.2 W) 4 hours 8.5 hours 6.6 hours 7.9 hours

The estimate is the power of the source divided by the power draw of the console. Batteries are not perfect, so 15% is taken off. Whether or not that is exact in every case, the comparison between power sources is accurate, because it is based on actual wattage.

Note: We do not recommend the EZFlash range of products. Their internals are very low quality and they are extremely power hungry.

On the original Game Boy, the CleanJuice turns the built-in GB LED to a dimmer red when you have about 5% battery left.

Note: versions sold before October 2020 do not do this.

The CleanJuice takes about 1 to 2 hours to charge from completely empty. This may vary depending on your charging cable.

There are 2 LEDs on the CleanJuice PCB itself: green (PG) and orange (CHG).

If the green light labeled PG is on, the USB cable is powering the system. This also means you can run your console from USB without draining the battery (plug and play).

If the orange light labeled CHG is on, USB is charging the battery. When it goes off, the battery is fully charged.

Both lights are on while the module is charging. Once it is fully charged, only the PG light stays on.

If you connect a USB cable and the PG light does not turn on, your cable or power supply is faulty.

Do I need to solder or cut anything for the CleanJuice?

Section titled “Do I need to solder or cut anything for the CleanJuice?”

No. The CleanJuice is a tool-free drop-in mod with no soldering. With a battery cover that has a USB-C opening (or one you modify yourself), you simply drop the CleanJuice into the original console. That’s it. Our pack comes with a matching battery cover.