[GBA] RS CleanAmp Universal
The CleanAmp replaces the original audio board with a modern and much louder Class-D amplifier. It can be used universally in all handheld consoles of the Nintendo Game Boy series.
Installation
Section titled “Installation”Before you start, always check whether the sound works at all. The most common cause of missing sound is a faulty speaker.
The best spot to install the CleanAmp amplifier in the Game Boy Advance is on the back of the volume wheel. Secure the board with a bit of double-sided tape.
Wire it up with plain AWG28-30 wire, but pretty much any insulated wire will do as long as it isn’t so thick that it gets in the way of parts during reassembly.

To make the sound even louder, you can bridge the jumpers on the right side of the CleanAmp board. This modification can easily be undone to restore the original volume.

- in the Game Boy Advance, the CleanAmp has a PureSilence mode that completely mutes the sound as soon as the volume wheel is set to 0
- background noise and interference get amplified along with the sound, which is why we recommend also installing the Dehum Dehiss Kit
