[GBP] RS CleanAmp Universal
The CleanAmp replaces the original audio board with a modern and much louder Class-D amplifier. It can be used universally for all handheld consoles of the Nintendo Game Boy series.
Installation
Section titled “Installation”Before you start, always check whether the sound works at all. The most common cause of missing sound is a defective speaker.
The best position for installing the CleanAmp amplifier in the Game Boy Pocket is on the back of the speaker. Optionally, you can secure the board with some double-sided tape.
Wiring is done with plain AWG28-30 wire, but pretty much any insulated wire will work as long as it isn’t so thick that it blocks parts during reassembly.

To make the sound even louder, you can bridge the jumpers on the right side of the CleanAmp board. This modification can easily be undone to restore the original volume.

