Which IPS screen fits your Game Boy Classic?
If you want to replace the screen of your Game Boy Classic (DMG-01), an IPS kit takes the place of the original LCD. You get a high-contrast picture with vibrant colours and an OSD menu for colour palettes and settings. The kits work for modding projects and for repairs when the original LCD is faulty.
On this page we compare the IPS kits for the Game Boy Classic from our shop. You will learn whether a laminated or a non-laminated kit suits your project, which shell you need and which guide to follow for the installation.
The IPS kits compared
Section titled “The IPS kits compared”All three kits are made by Hispeedido. Each one has an OSD menu, a battery indicator, retro effects and frame blending for true transparency.
| Q5 RIPS XL Laminated | Q5 RIPS XL | V5 Ultra | |
|---|---|---|---|
| Design | laminated | not laminated | not laminated |
| Screen lens | glass, bonded to the LCD | glass lens (XL) included | standard size, available separately |
| Alignment bracket | not needed | included | included |
| Viewing area | 11 % larger than the original | 11 % larger than the original | same as the original LCD |
| Colour palettes | 8 preset colour modes, customisable | 8 preset colour modes, customisable | 36 pre-configured colours |
| OSD menu | yes | yes | yes |
| Fits without modification | Hispeedido | Hispeedido | Hispeedido, RetroSix |
| Original shell | enlarge the screen cut-out, thin the underside to 0.7 mm | trim two screw posts, enlarge the screen window or keep it original (see below) | minor modifications |
| Soldering | solder the speaker. Solder-free with the “speaker pre-installed” option | solder the speaker. Solder-free with the “speaker pre-installed” option | solder the speaker. Solder-free with the “speaker pre-installed” option |
Both Q5 kits run at 720p with 16:1 pixel scaling. Every Game Boy pixel is shown without distortion.
Laminated or not laminated
Section titled “Laminated or not laminated”On a laminated kit the glass lens is bonded to the LCD at the factory. On a non-laminated kit the LCD and the screen lens are two separate parts that you fit one after the other. Both designs have their own use case. Which one suits you mainly depends on your shell and on what you want from the lens.
Laminated: Q5 RIPS XL Laminated
Section titled “Laminated: Q5 RIPS XL Laminated”- No dust or dirt can get between lens and LCD during the installation.
- You do not need a separate screen lens. Do not put a second lens on top of the laminated glass and do not separate the lens from the LCD, as this can damage the LCD.
- In the Hispeedido Shell Set, USB-C & IPS Ready you do not need to modify anything. In original shells and other shells you enlarge the screen cut-out and thin the underside down to 0.7 mm, otherwise the LCD will be destroyed.
This design suits you if you use a matching IPS ready shell and do not want to fit a lens dust-free yourself.
Not laminated: Q5 RIPS XL and V5 Ultra
Section titled “Not laminated: Q5 RIPS XL and V5 Ultra”- The screen lens is a separate part. The Q5 RIPS XL comes with a glass lens. The Q5 IPS XL screen lens (2.6 inches) is also available separately in many colours.
- For the V5 Ultra you use standard-size lenses, for example the DMG standard-size glass screen lenses or a plastic screen lens.
- You can swap the lens separately from the LCD, for example if you want a different colour.
- The Q5 RIPS XL also fits original shells and all other shells from our shop. You trim the screw posts in any case. You can enlarge the screen window or keep it original. If you keep it original, the typical DMG borders around the picture disappear and the edges of the picture may be cut off slightly. Many people use the kit exactly like that.
- When fitting the lens, it is up to you to keep dust out between LCD and lens. A dust blower helps.
This design suits you if you want to pick the lens by colour, swap it later or use a shell without an enlarged screen window.
Which shell do you need
Section titled “Which shell do you need”All three kits also fit an original shell, but then you have to modify it. An IPS ready shell saves you that work. You can find all shells in the Game Boy Classic shells category.
Hispeedido Shell Set, USB-C & IPS Ready
Section titled “Hispeedido Shell Set, USB-C & IPS Ready”The Hispeedido shell set fits the Q5 RIPS XL Laminated, the Q5 RIPS XL and the V5 Ultra. We recommend this shell for both Q5 kits because you do not need to modify it.
- You can still use the original LCD.
- The battery compartment takes AA batteries. A battery cover with a USB-C opening is included, for example for the Hispeedido USB-C battery pack or the RetroSix CleanJuice.
- The screen lens comes with the kit: on the Q5 RIPS XL Laminated it already sits on the LCD, the Q5 RIPS XL includes one. For the V5 Ultra you use a standard-size lens.
RetroSix Shell Set, USB-C & IPS Ready
Section titled “RetroSix Shell Set, USB-C & IPS Ready”The RetroSix shell set is prepared for full-size IPS kits such as the V5 Ultra. The kit drops in without modifications.
- You can still use the original LCD.
- A tempered glass screen lens is included.
- The battery compartment works with batteries and battery mods. A battery cover and a USB-C battery cover are included.
Original shell or other shells
Section titled “Original shell or other shells”The guide for each kit shows how to modify an original shell, with measurements and photos:
- Q5 RIPS XL Laminated: enlarge the screen cut-out and thin the underside down to 0.7 mm. Guide
- Q5 RIPS XL: cut two screw posts at the top flush. Enlarge the screen window for the full picture with DMG borders, or keep it original. Guide
- V5 Ultra: minor modifications. Guide
Installation: what you need
Section titled “Installation: what you need”- A Y1 tri-wing screwdriver for the shell screws and a PH1 Phillips screwdriver for the mainboard and inner screws. A plastic spudger helps with opening. In our shop: 10-in-1 screwdriver set
- Tweezers for the ribbon cables: ESD tweezers set
- A dust blower to keep dust off LCD and lens
- A craft knife if you need to modify a shell
- A soldering iron for the two speaker contacts. On the Q5 kits polarity does not matter. If you choose the “speaker pre-installed” option, you do not need a soldering iron.
Before the installation: function test
Section titled “Before the installation: function test”Test the kit outside the shell before you install it. How do I test the LCD shows how. Kits that have already been installed cannot be returned under warranty. Only use the brightness and settings wheel once everything is installed, otherwise it can break.
- Take the Game Boy apart: Shell disassembly
- Test the kit outside the shell
- Modify the shell if you are not using a matching IPS ready shell
- Install the kit following the guide for your model
| Kit | Installation guide | In our shop |
|---|---|---|
| Q5 RIPS XL Laminated | [DMG] Q5 RIPS Laminated IPS Kit by Hispeedido | View product |
| Q5 RIPS XL | [DMG] Q5 RIPS IPS Kit by Hispeedido | View product |
| V5 Ultra | [DMG] V5 Pro Kit by Hispeedido | View product |
The V5 Ultra is the successor of the V5 Pro. The LCD and the visible area are the same, only the LCD holder is shaped slightly differently. The V5 Pro guide therefore also applies to the V5 Ultra.
Once installed, hold the contrast button to open the OSD. Pressing the button once outside the OSD switches the colour palette.
If the kit does not start
Section titled “If the kit does not start”Sometimes the original screen works, but an IPS kit does not start. Often the original voltage regulator is weak or faulty. Checking the voltage regulator shows how to measure it with a multimeter. Two replacement regulators are available:
- Hispeedido IPS voltage regulator: supplies a stable 5 V to the console and the IPS screen. It only works with an IPS screen, not with the original screen.
- RetroSix CleanPower v2: works with the original LCD and with modern screens. Installation: [DMG] RetroSix CleanPower
If a ribbon cable is damaged, replace it with the 21-pin FFC ribbon cable for IPS kits.
Frequently asked questions
Section titled “Frequently asked questions”Do I need to solder an IPS kit?
Section titled “Do I need to solder an IPS kit?”On all three kits you solder the speaker to the new board. With the “speaker pre-installed” option you install the kit without soldering.
Do I need a new shell?
Section titled “Do I need a new shell?”No. All three kits fit an original shell once you modify it. With an IPS ready shell you skip that step.
Do I need a new screen lens?
Section titled “Do I need a new screen lens?”Not for the Q5 RIPS XL Laminated, its lens already sits on the LCD. The Q5 RIPS XL comes with a glass lens. The V5 Ultra needs a standard-size lens, and the RetroSix shell set includes one.
You can find all screen kits for the Game Boy Classic in the Game Boy Classic screens category.
