Skip to content

[SNES] PicoCIC Region Free Mod

The SNES PicoCIC is the world’s smallest region-free CIC mod for the SNES. Thanks to its easy installation, it’s the best way to play your SNES or Super Famicom games without region lock.

In the first step, the OEM CIC (Checking Integrated Circuit) has to be removed.

The PicoCIC now takes the place of the OEM CIC. Make absolutely sure it is positioned correctly! The following are connected:

  • Pin 1
  • Pin 2
  • Pin 7
  • Pin 8
  • Pin 9
  • Pin 10
  • Pin 11
  • Pin 18

If you have one available, check the connection to the PicoCIC with a multimeter.

The following pins are lifted and connected:

PPU1 -> Pin 24

PPU2 -> Pin 30

Important: The contact between the pins and the pad underneath must be broken.

Both pins are connected to the corresponding contact on the PicoCIC.

The PicoCIC comes with a status LED that replaces the SNES’s OEM LED. To do this, the OEM LED is removed completely.

The short wire of the LED is connected to the 5V contact, the other two wires to the PicoCIC. Mind the polarity!

In the last step, tidy up the wire routing, insulate any exposed contacts and reassemble the console.

  • Switch the region by pressing the reset button for half a second
  • 50Hz, 60Hz or auto-detect mode is indicated by two LEDs (red/blue/purple)

Buy the PicoCIC Region Free Mod now at silentmodding.com! https://silentmodding.com/de/snes-picocic-region-free-mod.html