[DMG] Checking the Voltage Regulator
Sometimes, after installing a mod in the original Game Boy (DMG), it doesn’t work as intended. In many cases the original regulator has failed or is on its way out. This can result in the original screen working fine, while a new IPS kit doesn’t boot at all.
How to measure
Section titled “How to measure”Set your multimeter to DC voltage and probe the points shown in the picture below. If the reading is below ~4.8 V, it may be time to replace your regulator and perhaps recap the console.

Replacement parts
Section titled “Replacement parts”- Regulator: RetroSix CleanPower, installation see [DMG] RetroSix CleanPower
- Recap kit: Hand Held Legend recommends the Console5 recap kit.
